What Virtual Card Acceptance Costs Your Supplier, and What That Does to Your Rebate
- What a supplier actually pays when it accepts your card
- Why the fee lands differently on a $67 receipt and a $2,212 invoice
- Which suppliers get paid by virtual card, and which by plastic
- Level 2 and Level 3 data, and what qualification really changes
- Surcharging, convenience fees, and what is actually permitted
- The worked cost model, one supplier, one invoice, both sides of the ledger
- What supplier economics can do to a five-year rebate forecast
- When to leave a supplier on ACH, and how to decide
- The rebate case that survives contact with your supplier base
A supplier that accepts a virtual card pays a fee on the whole invoice, and that fee is what funds the buyer's rebate. On Visa's current schedule, interchange on a purchasing or corporate card payment made without the card present is 2.70% plus 10 cents, or 1.75% plus 10 cents when the payment carries full Level 3 line-item data. How much rebate a buyer can earn over time depends on how many suppliers will keep carrying that cost.
Virtual cards for AP payments can give buyers rebates on spend as well as tighter security and longer days payable outstanding (DPO). But how much spend can go on virtual cards, and how large the total rebate can grow, is set by supplier willingness to accept cards, not buyer appetite.
When a supplier accepts a card, it pays a fee on the full invoice amount, and the fee comes out of the sale's gross profit. Fees are one reason some suppliers hold back. Payment processing fees were the most common payments challenge for small businesses in the Federal Reserve Banks' 2024 Report on Payments, named by 52% of the employer firms surveyed in 2023.
In Corpay's own data, virtual cards carry nearly all the card dollars paid to construction-trade suppliers and a small share of what goes to airlines and restaurants, where most card dollars are on the plastic employees carry. That pattern lines up with how those suppliers usually bill, though it doesn't show which suppliers accept cards.
Suppliers that do accept cards can recover the cost by surcharging or renegotiating prices. Either way, some of the cost comes back to the buyer, and the rebate the buyer counted on shrinks.
Little of the published data on acceptance costs comes from suppliers or independent sources. Visa's and Mastercard's published interchange schedules fill part of that gap, and anonymized, aggregated Corpay spend data shows where virtual cards are used. Together they make it possible to follow one invoice from both sides of the ledger.
What a supplier actually pays when it accepts your card
When a supplier accepts a commercial or virtual card, it pays a merchant discount rate (MDR) on the full transaction value. The supplier's acquirer, the bank or processor that handles its card payments, sets the MDR and deducts it before the payment settles.
Three components make up the MDR, the interchange fee, the network's scheme fee, and the acquirer's markup.
The interchange fee is the largest component and goes to the card-issuing bank. It's a percentage of the transaction plus a small dollar amount, and the card networks publish the rates. On Visa's U.S. schedule effective Oct. 24, 2026, the standard rate for a purchasing or corporate card payment made without the card present (Commercial Card Not Present) is 2.70% plus $0.10. Payments that carry full Level 3 data qualify for Commercial Product 3 at 1.75% plus $0.10, and payments that fail Visa's processing requirements fall to a non-qualified rate of 2.95% plus $0.10. Mastercard's 2026-2027 U.S. schedule, effective April 17, 2026, has a similar ladder for large-market commercial credit cards. It runs from Data Rate III at 1.90% plus $0.10, through Data Rate II at 2.50% plus $0.10 and Data Rate I at 2.70% plus $0.10, to a standard rate of 2.95% plus $0.10.
The scheme fee is charged by the card network for using its routing infrastructure. It too is a percentage plus a small dollar amount, and it's much smaller than interchange. Visa's assessment on credit purchases is 0.14%, and its authorization fee on a U.S. credit card is $0.0195, according to the network fee guide published by the processor TabaPay and updated Nov. 9, 2026. Mastercard's assessment in that guide is also 0.14%, plus another 0.15% on purchases of $1,000 or more, with a network access fee of $0.0195 per authorization. Visa adds smaller charges the examples below leave out, among them a 0.01% fee on commercial card purchases and a 0.015% fee on card-not-present payments, the guide shows. A New York Fed staff report on credit card banking, citing the payments consultancy CMSPI, puts network fees at around 10 to 20 basis points of the purchase price for both networks.
The acquirer's markup is the margin kept by the payment processor or acquiring bank. Unlike interchange and scheme fees, it's negotiable, and no standard markup is published. For illustration, the processor Helcim lists an interchange-plus markup of 0.50% plus 25 cents for keyed and online payments at $40,000 a month in card volume, against 0.40% plus 8 cents in person.
Why the fee lands differently on a $67 receipt and a $2,212 invoice
The fixed dollar parts of the interchange and scheme fees take a larger slice of a small payment than of a large one. In anonymized, aggregated Corpay spend data for the 12 months from Aug. 1, 2025, to July 31, 2026, the average card payment to business dining merchants was about $67, and the average card payment to construction-trade merchants was about $2,212. Holding the rate at Visa's Commercial Card Not Present level isolates the fixed fee, though a restaurant bill paid in person would price at Visa's lower Commercial Card Present rate, 2.50% plus $0.10. Here's what each payment costs the supplier.
$67 restaurant receipt | $2,212 trade invoice | |
Interchange, 2.70% + $0.10 | $1.91 | $59.82 |
Visa assessment and authorization fees, 0.14% + $0.0195 | $0.11 | $3.12 |
Total fee (acquirer markup not modeled) | $2.02 | $62.94 |
Effective rate | 3.01% | 2.85% |
The fixed 10 cents of interchange and the two cents of network fee add about 0.18 percentage point to the restaurant receipt and less than 0.01 point to the trade invoice. On a busy restaurant's thousands of small receipts, that adds up.
For a supplier that bills by invoice, though, the fixed fee is a rounding error. Almost the whole cost is the percentage, which is why the rate tier a payment qualifies for matters far more to trade suppliers than the per-transaction fee. And the comparison that weighs on them is with ACH, which costs cents rather than dollars. The Cleveland Fed made the same point in a September 2026 payments research brief. It put the median fee for a receiving business at 2.0% to 2.5% for credit cards, said a card payment costs the receiver more than a wire once it passes about $300, and noted that receivers "may decline to accept medium- or large-value" card payments.
Which suppliers get paid by virtual card, and which by plastic
Corpay's data doesn't show which suppliers accept cards. What it shows is how card dollars split among three card products when Corpay customers pay a given kind of supplier. A virtual card is a card number issued for a specific supplier payment, a ghost card is an account number kept on file with one supplier, and a physical card is the plastic an employee carries.
The split lines up with how these kinds of suppliers usually get paid. Virtual cards dominate in categories that usually bill by invoice, and plastic leads in categories where an employee usually pays at the point of sale.
Trade contractors, building suppliers, auto repair shops and utilities usually bill by invoice, and a virtual card fits a bill with a known supplier and a known amount, because the number can be issued for that bill and nothing else. Business dining and airlines sit at the bottom with about three-quarters of their card dollars on physical cards, which fits employees buying meals and tickets themselves. Freight is the odd one out, with most of its card dollars on ghost cards, which fit suppliers a business pays again and again.
Three limits apply. The data doesn't record why a payment went on one card rather than another, so the billing explanation is a reading of how each product is built to work, not a finding. A low virtual share isn't evidence that suppliers refuse cards, since airlines and restaurants take plastic every day. And the data comes from Corpay's payables division, so the book tilts toward invoice-paid categories. A high virtual share inside the card book doesn't mean cards dominate supplier payments, either. On Corpay's AP platform in the 12 months through July 31, 2026, Mastercard credit card payments made up 28.3% of invoices paid but 9.85% of invoice value, according to anonymized, aggregated Corpay spend data.
What the table does show is where, within Corpay's card book, virtual cards carry the largest share of card dollars. Those are trade suppliers paying a percentage of every invoice, the suppliers for whom the ACH comparison is sharpest.
Level 2 and Level 3 data, and what qualification really changes
Submitting extra transaction data can lower a supplier's interchange rate, though it doesn't change the scheme fee or the acquirer's markup. Level 2 data adds the tax amount and a purchase-order number. Level 3 adds line-item detail such as product codes, quantities and unit costs.
On Visa purchasing and corporate cards, outside fuel, only full Level 3 data now earns a lower data rate. Since Oct. 18, 2025, Level 3 data has gone through Visa's Commercial Enhanced Data Program, which replaced the old Level 3 program and qualifies payments for Commercial Product 3, according to a July 2025 bulletin from the processor TabaPay. Visa verifies businesses on the quality of the line-item data they send, and only verified businesses get the Product 3 rate. Visa charges a participation fee of 0.05% on each payment processed under the program, including payments that don't end up qualifying, the bulletin says. A Visa purchasing or corporate card payment without that data pays the standard Commercial Card Not Present rate, 2.70% plus $0.10. The 2.95% non-qualified rate is a separate penalty for payments that fail Visa's processing requirements, and Visa's schedule shows the same 2.95% for "Non-Qualified with Data," so sending data doesn't protect a payment from it.
Mastercard still pays for Level 2. On its schedule, Data Rate II (2.50% plus $0.10) sits between Data Rate I and Data Rate III, so a supplier with only Level 2 data still saves something on a Mastercard payment. Corpay's guide to Level 2 and Level 3 card data covers the fields in more detail.
Both schedules also list rates for large payments that the examples here don't use. Visa's includes Straight Through Processing, at 2.00% plus $0.10 for payments under $7,000, and Commercial Product Large Ticket at 1.30% plus $35.00, and Mastercard's lists a Large Ticket rate of 1.45% plus $35.00 for large-market commercial credit. The schedules don't set out which payments qualify, so a supplier's acquirer is the one to ask.
Here's what qualification does to the fee on a $4,289 virtual card payment to a building-supply vendor, about the average virtual card payment to building-supply merchants in the same 12 months of Corpay data. That's the largest average virtual card payment of the ten categories in the table, so the dollar amounts run high. The proportions don't depend on it. In the same calculation, full Level 3 data cuts the fee by about 31% to 32% on any invoice from $300 to $10,000. Scheme fees here are Visa's 0.14% assessment plus its $0.0195 authorization fee, or $6.02, and the acquirer's markup is set at zero.
Full Level 3 data saves this supplier $38.60 on one invoice, cutting its cost of taking the card by nearly a third. A processing failure costs it another $10.73 on top of the standard rate. On Mastercard's schedule the same invoice would carry $115.90 in interchange at Data Rate I, the same as Visa's standard rate, and $81.59 at Data Rate III.
Surcharging, convenience fees, and what is actually permitted
Suppliers can apply surcharges to credit card payments. A surcharge is typically a percentage of the transaction added at the point of sale.
Suppliers can also charge convenience fees, a flat charge for paying through a nonstandard channel. Unlike surcharges, these aren't limited to cards and don't rise with the size of the transaction. Mixing up the two in supplier communications is an avoidable source of billing disputes.
Both major card networks permit surcharging within limits. Visa caps a surcharge at the supplier's merchant discount rate or 3%, whichever is lower, and requires disclosure at the point of entry, at the point of sale and on every receipt, according to its merchant surcharging Q&A. Mastercard's surcharge rules cap a brand-level surcharge at the lower of the supplier's average effective merchant discount rate or 4%. Neither network permits surcharging a debit or prepaid card. Visa and Mastercard both require a supplier to give at least 30 days' notice before it starts surcharging, to its acquirer and, for Mastercard, to Mastercard as well.
Whether a supplier can legally surcharge also depends on state law. Several states have restricted surcharges, and some of those laws have been challenged in federal court on First Amendment grounds. New York amended its law in 2024 to permit surcharging under new disclosure rules.
The rules may move again. A $38 billion settlement between Visa, Mastercard and merchants would let merchants choose whether to accept commercial cards as a category separate from consumer cards, according to Reuters' report on its preliminary approval in June 2026, and the Electronic Payments Coalition, which supports the deal, says it would give merchants more options to surcharge. U.S. District Judge Brian Cogan held the final approval hearing on Nov. 16, 2026, and "did not decide at a hearing whether to grant final approval," Reuters reported that evening.
Best practices for a virtual card program
Learn the internal strategies that make a virtual card program succeed — from program design to driving the vendor acceptance that determines how much of your AP spend earns rebates.
Download the guideThe worked cost model, one supplier, one invoice, both sides of the ledger
To see what a supplier actually pays on a virtual card transaction, follow the same $4,289 invoice from a building-supply vendor, paid by Visa virtual card. The ledgers show what the supplier nets after its fees, and how those fees split among the card network, the issuing bank and the buyer's rebate. They also show how much those numbers shift when the supplier sends full Level 3 data.
The scheme fees total $6.02, and for simplicity the acquirer's markup is zero. The ledgers assume, for illustration, that the issuer returns 86% of interchange as a rebate. That's the average share of interchange paid back as rewards on consumer general-purpose rewards cards in the New York Fed staff report, which drew on supervisory data covering about 550 million accounts.
On this invoice it makes the rebate 2.32% of the payment, above the 1.57% of purchase volume the same report found banks spend on consumer rewards, so treat it as a generous case. Commercial rebates are negotiated and vary by program, and a program that pays a fixed share of spend wouldn't pass a change in interchange through to the buyer at all. The five-year illustration later in this paper uses a round 1% instead.
Here's how the transaction looks to the buyer and the supplier at Visa's standard Commercial Card Not Present rate of 2.70% plus $0.10.
The $22.25 difference between what the buyer pays, net, and what the supplier receives, net, is the share of fees kept by the issuer and the card network.
The $121.92 the supplier pays funds the $99.67 rebate, with $16.23 kept by the issuer and $6.02 by the card network. An acquirer's markup would raise the supplier's fee without changing the rebate. At Helcim's published keyed and online markup of 0.50% plus 25 cents, it would add $21.70, taking the supplier's total to $143.62, or 3.35% of the invoice.
Now the same invoice with full Level 3 data, at Commercial Product 3, 1.75% plus $0.10, plus the 0.05% program fee.
Read the two ledgers side by side and the trade is plain. Under the 86% assumption, the buyer's rebate on this invoice falls by $35.03 when the supplier qualifies for the lower rate, and the supplier keeps $38.60 more. Whether a lower interchange rate reaches your rebate at all depends on how your program sets it, since commercial rebates are negotiated program by program.
The rebate is always funded by the supplier's card fees, so a supplier whose cost of acceptance falls by nearly a third has less reason to push back with a surcharge, a price increase or a request to switch to ACH. A smaller rebate on a card the supplier keeps taking is worth more than a larger one on a card it drops.
What supplier economics can do to a five-year rebate forecast
The buyer's rebate comes from the fees suppliers pay to accept cards, so in theory more card spend means a bigger rebate. In practice, supplier economics set a limit. When margins are squeezed, suppliers don't have to absorb card fees. They can move back to ACH or check, add a surcharge, or renegotiate prices. Over five years, a rebate target built on ever-rising card spend and no cost-sharing can drift further and further from what the program pays.
The illustration below shows how far. It rests on round-number assumptions chosen to show the mechanism, not on Corpay data or any program's terms. A buyer plans to grow virtual card spend from $20 million to $28 million over five years at a rebate of 1% of card spend. From year three, suppliers holding 10%, then 15%, then 20% of the planned card spend move back to ACH, and suppliers holding another 5% add a 2.5% surcharge, which the buyer pays.
In this illustration the program delivers about 82% of its forecast, and the gap opens in year three, after the plan has already been approved.
Supplier costs are already rising in some of the categories in the table above. Construction materials costs were 6.0% above a 2024 baseline under tariff rates as of April 7, 2026, according to Cushman & Wakefield, which expects further cost pressures in the months ahead. In the National Restaurant Association's release on its 2026 State of the Restaurant Industry report, 42% of operators said their restaurants weren't profitable in 2025, and more than nine in 10 cited food, labor, insurance, energy and swipe fees as significant challenges. And the International Air Transport Association cut its 2026 forecast for the airline industry's net profit margin to 2.0% in June, roughly half the 3.9% it had projected.
How this affects a buyer's rebate depends on its suppliers. A buyer whose card spend sits mostly with trade suppliers paid by virtual card has the most rebate exposed if those suppliers' costs keep climbing, even though that spend looks safe today. A buyer whose card spend goes mostly to restaurants, hotels and airlines has less virtual card spend at stake, but those merchants may gain the option to decline commercial cards as a category if the swipe fee settlement wins final approval.
There's a second risk on the issuer's side. Banks decide how much interchange to pass through as rebate, so check your rebate agreement for when and how the issuer can change the rate.
Estimate rebate yield conservatively, and revisit your supplier assumptions every year rather than assuming today's pattern holds for five.
When to leave a supplier on ACH, and how to decide
There will always be some suppliers for whom card fees are simply too expensive. Whether to leave them on ACH or rethink the relationship depends on how important they are to the business and whether substitutes exist.
The Kraljic matrix, a standard procurement tool, segments suppliers by supply risk and profit impact.
Strategic, or critical, suppliers provide inputs essential to the business and have few substitutes, so preserving the relationship comes first.
Leverage suppliers provide important inputs but have many alternatives, so the buyer holds the balance of power.
Bottleneck suppliers provide lower-value inputs that are prone to sudden price changes and have few substitutes, so securing long-term supply and finding alternative sources matter most.
Routine, or noncritical, suppliers provide easily substitutable products available from many sources, so the buyer again holds the balance of power.
In Corpay's data, most card dollars paid to trade suppliers already arrive by virtual card. But if they're strategic or bottleneck suppliers, they have the power to build card fees into their prices, in which case higher costs can swallow the rebate you think you're earning.
Routine suppliers are easy to replace, so requiring card can look free. But a thin-margin supplier may treat card fees as a real threat to its business. Make accepting cards a condition of doing business and it may politely decline, and in a thin-margin category the next supplier may answer the same way.
ACH usually costs a supplier less than card for large payments. Card fees scale with the size of the transaction, while AFP's 2022 Payments Cost Benchmarking Survey put the median cost of initiating and receiving an ACH payment at 26 to 50 cents, according to Nacha's summary, whatever the amount. Suppliers that invoice large amounts may prefer ACH for that reason alone.
ACH has a cost the per-payment figure doesn't show. In the 2026 AFP Payments Fraud and Control Survey, business email compromise affected 74% of organizations in 2025, with fraudsters mainly impersonating vendors or executives to ask for changes to payment instructions. If an impersonator gets a supplier's bank details changed in a buyer's vendor file, later payments go to the fraudster's account. Among organizations with revenue under $1 billion that lost money to payments fraud that year, 24% recovered none of it. Checks were the payment method most often hit, reported by 58% of organizations, followed by ACH debits at 30%, wire transfers at 25%, corporate or commercial credit cards at 21% and ACH credits at 18%. A virtual card number generated for one payment gives a fraudster little to reuse.
In practice, suppliers take different payment types depending on the size of the invoice and the relative fees. A supplier might take a card on a small invoice and ask for ACH on a large one, the pattern the Cleveland Fed brief describes. Payables platforms can route each payment to the right method automatically. Corpay's payments automation, for example, takes ACH, virtual card and check payments in one file upload, and the company says it "routes each payment through the appropriate method based on vendor enrollment status and payment optimization." Corpay also handles vendor enrollment and onboarding for its clients, with a vendor enrollment team that works to bring more suppliers onto card.
Virtual cards built for AP
Pay vendors with single-use cards locked to a specific supplier, amount, and date — then earn rebates on every payment. Corpay's vendor enrollment runs 2-3x higher than competitors, so more of your spend qualifies.
Explore virtual cardsThe rebate case that survives contact with your supplier base
Rebates aren't free money. Suppliers pay for them. To earn a rebate that lasts, you need to consider how your suppliers are likely to respond when you ask to pay by card.
So set your rebate forecast, the buyer's ledger, against a hard look at the supplier's. Identify the suppliers that are important to the business and difficult to replace. Find out which of them can absorb card fees, which would want to share the cost through surcharges or higher prices, and which would rather decline your business than accept cards. Ask which of them could qualify for a lower rate with Level 3 data. Estimate what it would cost to lose a reliable supplier or pay more for an essential input. Then build a five-year forecast of card acceptance that assumes some of them will say no.
The answers will tell you more about what your rebate program will earn than any rate card.
Frequently Asked Questions
What does it cost a supplier to accept a virtual card?
It depends on which rate the payment qualifies for. On Visa's current schedule, interchange on a purchasing or corporate card payment made without the card present is 2.70% plus $0.10, or 1.75% plus $0.10 with full Level 3 data, and the supplier also pays network fees and its acquirer's markup. The acquirer, not the card network, sets the total merchant discount rate.
Why do suppliers refuse credit card payments from customers?
Fees are the problem the evidence points to most often. Payment processing fees were the most common payments challenge for small businesses in the Federal Reserve Banks' survey, and the Cleveland Fed notes that because card fees rise with the size of the payment while ACH and wire fees don't, businesses receiving payments may decline medium- or large-value card payments. The fee bites hardest when it takes a large share of the gross profit on a sale and the supplier can't surcharge or raise prices to protect its margin.
Can a supplier surcharge a B2B card payment?
Generally yes, on credit cards and within limits set by the card networks. Visa caps surcharges at the merchant discount rate or 3%, whichever is lower, and Mastercard at the lower of the average effective merchant discount rate or 4%. Some states restrict surcharging, so suppliers should check their state's rules first.
How is a card rebate calculated, and who ultimately pays for it?
The supplier's acceptance fee funds the rebate, and the supplier gets something for it. The issuer collects interchange from the supplier's side of the transaction and returns part of it to the buyer under the terms of the rebate agreement. In exchange, the supplier is usually paid sooner, often with funds arriving the day after authorization, and gets a clean per-invoice transaction record to reconcile, as Corpay's guide to accepting virtual card payments explains. Some programs also share part of the rebate back with the supplier to soften the fee.
What are Level 2 and Level 3 data, and do they lower the fee?
They can, if the payment qualifies. Level 2 adds tax and purchase-order information to a transaction, and Level 3 adds line-item detail. On Visa purchasing and corporate cards, only full Level 3 data sent through the Commercial Enhanced Data Program earns the lower Commercial Product 3 rate, with a 0.05% program fee, while Mastercard still pays a lower rate for Level 2 data.
Is it cheaper for a supplier to be paid by ACH or by card?
ACH is cheaper for almost any invoice of size. An ACH payment costs a business a fraction of a dollar regardless of the amount, while card fees are mainly a percentage of the invoice and rise with it.
How much rebate can a company realistically earn on its payables?
There's no single reliable figure, because the share of suppliers that will take a card, and on what terms, varies widely. A forecast that multiplies today's card spend by the rebate rate will come in high whenever suppliers surcharge, raise prices or move to ACH, as the five-year illustration above shows.
Should we pay a strategic supplier by card if they object?
Ask first what would make card work for them, and keep them on ACH if nothing does. Level 3 data, paying sooner, or sharing part of the rebate can each lower the supplier's real cost. If none of those closes the gap, the risk of losing a strategic supplier outweighs the rebate on its spend.
- What a supplier actually pays when it accepts your card
- Why the fee lands differently on a $67 receipt and a $2,212 invoice
- Which suppliers get paid by virtual card, and which by plastic
- Level 2 and Level 3 data, and what qualification really changes
- Surcharging, convenience fees, and what is actually permitted
- The worked cost model, one supplier, one invoice, both sides of the ledger
- What supplier economics can do to a five-year rebate forecast
- When to leave a supplier on ACH, and how to decide
- The rebate case that survives contact with your supplier base
Switch to Corpay
Discover how making the move to Corpay streamlines payments and strengthens your business.
Talk to an ExpertSmarter payments. Stronger growth. Keep business moving.
Corpay powers payments for 800,000+ businesses worldwide. Let’s build what’s next for yours.






