Corpay

Tipalti Pricing in 2026: What the Plans Cost and What Sits Outside the List Price

Category:AP Automation, Payments Automation
Updated:2026-12-03
Author:David Luther
hero_tipalti-pricing

Tipalti pricing starts at $99 a month for an accounts payable plan, as listed on Tipalti's pricing page in November 2026. On top of that base fee, you pay transaction fees per invoice and per payment, and those depend on your payment volume, number of entities and enabled modules.

So the $99 figure is real, but it's a floor. The number that ends up in your budget comes from a quote, and the quote is built from inputs you control more than you might expect.

Key Takeaways

  • Tipalti publishes starting prices for its AP and Mass Payments plans, and both are base platform fees rather than totals.

  • Per-invoice and per-payment rates, module prices and professional-services fees aren't published, so every realistic total comes from a quote.

  • Tipalti doesn't charge per user or per approver, and it doesn't offer a free tier.

  • Payment mix moves the total more than the platform fee does, because each payment method carries its own transaction price.

  • The cleanest way to compare quotes is to price your own invoice count, payment count by method and entity count against each vendor's rates.

How much does Tipalti cost?

Tipalti costs $99 a month to start on an AP plan, plus transaction fees that Tipalti quotes individually. Its pricing page describes "a base platform fee, plus fees determined by your payment volume, number of entities, and enabled modules."

Here's what the page shows and what it leaves for the sales conversation, as read in November 2026.

Item

Published?

What the page says

AP plan

Yes

Starting at $99/month

Mass Payments plan

Yes

Starting at $249/month

Users and approvers

Yes

No per-user or per-approver fees

Free tier

Yes

None offered

Per-invoice transaction rate

No

"Transaction pricing per invoice and payments," no figure

Per-payment rate by method

No

Fees "vary by payment method and destination"

Procurement, Expenses and Treasury modules

No

"Request a Quote"

Professional services beyond standard setup

No

"May require additional professional services"

Contract term and renewal terms

No

Not on the page

Source: Tipalti pricing page, read November 2026. Pricing pages change without notice, so confirm current figures in your quote.

The claim that Tipalti publishes no pricing at all is out of date. Starting prices are public, and the transaction layer, where most of the money sits, is not.

What does the $99 starting plan include?

The starting AP plan includes unlimited users, a self-service supplier portal and core automation features, according to Tipalti's pricing page. Unlimited users matters more than it sounds. Approval chains tend to grow as a company adds entities and department heads, and a per-seat model would tax that growth directly.

What the starting plan doesn't tell you is how many invoices or payments the base fee covers before transaction pricing applies. Ask that early. If the answer is "none," the base fee is a platform charge and nearly all of your variable cost lives in the per-transaction rates.

Is there a free version of Tipalti?

No. Tipalti doesn't offer a free tier or a free plan, according to its pricing page. Teams that want to trial the workflow usually do it through a sales demo or a scoped pilot, and it's worth asking whether pilot transactions are billed at contract rates.

What fees sit outside Tipalti's list price?

Four categories of cost sit outside the list price, and the first one usually dominates. Each comes through the quote.

  • Transaction pricing, charged per invoice and per payment

  • Entity count, priced by how many legal entities you run through the platform

  • Add-on modules, which list no price

  • Professional services for anything beyond a standard implementation

For a domestic AP team, the payment rails that matter are ACH and check. Card payments may be available depending on the contract, but treat that as a question for the quote rather than an assumption. Each rail carries its own price, because "fees vary by payment method," and a check costs real money to print and mail.

Procurement, Expenses and Treasury each carry a "Request a Quote" button rather than a price. If your evaluation started as an AP project and slowly picked up purchase orders and employee expenses, those modules can change the total more than the base plan does.

Does Tipalti charge per user, per payment or per entity?

Tipalti charges per invoice and per payment, and it prices by entity count and enabled modules, but it doesn't charge per user. Its pricing page says plainly that it does "not charge per-user or per-approver fees."

That structure rewards companies with lots of approvers and moderate volume, and it penalizes the reverse. A three-person AP team paying 4,000 invoices a month across six entities will see a very different quote from a 40-person finance org paying 300 invoices across one entity, even though the second company has far more users. If you're running a NetSuite AP automation evaluation with OneWorld subsidiaries, count entities the way the vendor counts them, not the way your org chart does.

What does a Tipalti implementation cost?

A standard Tipalti implementation is included in the subscription, according to its pricing page, which says "standard implementations are included and cover common AP and payment workflows." More complex environments "may require additional professional services," and the page doesn't price those or publish a timeline.

For a sense of timing, Tipalti's own customer story on Custom Ink says the retailer went "live in 136 days," alongside a NetSuite migration across four US entities. That's one company's vendor-published experience, and it included an ERP change most buyers won't be running at the same time. Ask for references from customers with your ERP, your entity count and no concurrent migration.

What counts as "complex" is the real question. Custom approval routing, multiple ERP instances, unusual vendor master data and heavy PO matching are the usual triggers for a services line item, so get the definition in writing before you sign.

Protect cash flow with modern AP

Modernize AP to cut costs, speed approvals, and mitigate payment risk — gaining the real-time visibility to protect cash flow and scale with confidence.

Download the whitepaper
protect-cashflow-with-ap.jpg

What do companies actually spend on Tipalti?

Buyers spend a median of $15,384 a year on Tipalti, according to Vendr's marketplace data drawn from 41 purchases. That's a third-party estimate from one procurement platform's transactions, so treat it as a rough reference point rather than a price.

That median is more than ten times the starting AP fee annualized, which tells you how much of the bill comes from the transaction layer and add-ons. It also tells you very little about your own number, because the buyers behind it vary in volume, entity count and module mix. A worksheet built on your inputs is more useful.

Cost line

Your input

Rate source

Monthly platform fee x 12

Plan tier

Published starting price, confirmed in quote

Invoices per year x per-invoice rate

Annual invoice count

Quote only

ACH payments per year x ACH rate

Annual ACH payment count

Quote only

Check payments per year x check rate

Annual check count

Quote only

Card payments per year x card rate, if offered

Annual card payment count

Quote only

Entity charges

Number of billable entities

Quote only

Add-on modules

Modules you'll actually turn on

Quote only

Professional services

Scope beyond standard setup

Quote only

Add the lines for a first-year total. Tipalti doesn't publish per-transaction rates, so fill each "quote only" line with the rate you get in writing.

I'd resist filling the blanks from a forum post, since those rates come from someone else's contract and volume tier.

Why is Tipalti pricing hard to compare?

Tipalti pricing is hard to compare because two quotes with the same platform fee can diverge sharply once your payment mix and entity count are priced in. The base fee is identical across buyers, while the transaction layer isn't.

Payment mix is the lever most buyers underweight. Checks were 26% of organizations' outgoing B2B payments in 2025, down from 81% in 2004, according to the Association for Financial Professionals' 2025 AFP Digital Payments Survey Report. Counting transactions instead, checks fell from 32% of B2B payments in 2015 to 13% in 2024 while ACH rose from 25% to 41%, according to the Federal Reserve Bank of Cleveland's 2026 brief, B2B Payments: A Gradual Shift from Checks to Electronic Payment Methods.

Those two numbers measure different things, but they point the same way. B2B payments on the ACH Network reached 2.2 billion in the second quarter of 2026, up 9.9% year over year, and 4.3 billion for the first half, according to Nacha's Q2 2026 network results.

Here's why that matters for a quote. If a third of your payments still go out by check, the per-check rate multiplies across a big slice of your volume, and that slice is the one your suppliers are slowly abandoning anyway. A quote priced on today's mix can look expensive next year for reasons that have nothing to do with the vendor. Corpay, for comparison, pays suppliers by virtual card, ACH or check from one approval flow, which is why it's worth pricing every quote on the same payment-mix assumptions.

What should you ask in a Tipalti quote?

Ask for every rate that the pricing page leaves out, in writing, and ask how each one is counted. The list below turns a quote into a number you can compare with another vendor's.

  • What's the per-invoice rate, and does it change by volume tier?

  • What's the per-payment rate for ACH, for check and for card, if card is offered?

  • What counts as a billable payment? Are voided, reissued or returned payments billed again?

  • How are entities counted and priced, and what happens when you add one mid-contract?

  • Which modules are in the quote, and which ones were bundled to make the first year look cheaper?

  • What exactly does "standard implementation" cover, and what triggers a professional-services fee?

  • What's the contract term, and what's the renewal uplift cap?

  • Is there a minimum annual commitment on transactions?

Buyers tend to forget the renewal question, and it's the one with the least leverage later, once your vendor master and approval rules live in the system.

Is Tipalti worth the price?

Tipalti is worth the price for teams that want self-serve AP software with broad ERP coverage and a self-service supplier portal. It's a weaker fit when you'd rather have a service team handle supplier enrollment and follow-up for you, or when payment volume makes per-transaction fees the biggest line in the budget.

The ERP coverage is genuine. Tipalti's integrations page lists NetSuite ("Verified for NetSuite and NetSuite OneWorld"), Sage Intacct (certified), Microsoft Dynamics 365 Business Central (AppSource certified), Acumatica ("Technically Validated") and QuickBooks Online (certified). The company lists "1000+" employees and $750M in total funding, and its last disclosed valuation was $8.3 billion in a $270 million Series F led by G Squared in December 2021, according to Calcalist.

Whether the price pays off depends on how much manual work the software removes. In The Hackett Group's Digital World Class Matrix for Accounts Payable, which evaluated 15 AP software providers against 17 criteria, AP solutions averaged 60% touchless invoice processing, companies at 30% or more touchless averaged 3.5 times higher AP productivity, and average AP cycle times fell 59%. Those are category figures, not Tipalti's, and they're useful mostly as the bar to hold any vendor's references against.

The status quo has a time cost as well. In Yooz's 2025 survey of 600 US professionals, 69% of finance leaders said their teams spend at least four hours a week tracking down documents and approvals, according to Yooz's Leaders vs. Ledger survey. Yooz sells AP software, so weigh the number accordingly, but the pattern will be familiar to most controllers.

There's also a working capital angle that pricing pages never mention. The 1,000 largest North American nonfinancial public companies carry a record $1.94 trillion working capital opportunity, $548 billion of it in payables, according to The Hackett Group's 2026 North American Working Capital Survey. Days payable outstanding improved 2.9 days, and the cash conversion cycle fell 0.2 days to 38.4 days. Paying on the due date instead of early, or extending terms by paying by card, can be worth real money, and that value comes from how you pay.

So the answer to "is it worth it" depends on whether you're buying software or buying an outcome. Tipalti's pricing tends to work well when these hold:

  • Your team has the capacity to run supplier payments automation in-house, including enrollment and payment exceptions.

  • Your approver count is high relative to invoice volume, so unlimited users saves real money.

  • Most of your payments already go out by ACH, which keeps the per-payment layer predictable.

If capacity is the constraint, compare it against AP automation solutions built around a managed service, and against the broader field of accounts payable software.

How Corpay's cost model differs

There's no list price to compare here either. What differs is the cost structure, which is built around the payment-mix problem described above.

Corpay runs fully managed AP. The software handles invoice capture and AP approval workflows, and a service team handles the work that usually lands on your desk, from supplier enrollment and payment delivery to follow-up when a supplier calls about a missing remittance. Payments go out by virtual card, ACH or check from one approval flow.

The biggest structural difference is what happens on the card side. Virtual card spend earns rebates, and Corpay pays out $800M+ in rebates per year across its programs. Single-use virtual cards also replace checks with a payment that can't be washed or reused. A supplier you move from check to card stops costing you a printed check and starts earning back part of what you spend.

Corpay connects to your ERP through 100+ ERP integrations, including NetSuite, Sage Intacct, Business Central and Acumatica, and most teams are live in weeks. Customers report about 40% time saved on AP work.

If you're building the cost case across vendors, it helps to understand what AP automation is at the process level and where payments automation changes the math. See how Corpay AP Automation handles your payment mix, or how Corpay virtual cards turn supplier payments into rebates.

Frequently Asked Questions

How much does Tipalti charge per month?

Tipalti's AP plans start at $99 a month and its Mass Payments plans start at $249 a month. Those are base platform fees. Transaction fees per invoice and per payment, entity charges and add-on modules come on top and are quoted individually.

Does Tipalti charge transaction fees?

Yes. Tipalti layers transaction pricing on top of its subscription, charging per invoice and per payment. It doesn't publish the rates, and it says fees vary by payment method, so ask for each rate in writing.

Is Tipalti pricing per user?

No. Tipalti doesn't charge per-user or per-approver fees, and its plans include unlimited users. Pricing depends on payment volume, number of entities and enabled modules, so a large approval team doesn't raise the bill on its own.

Does Tipalti include implementation?

Standard implementation is included and covers common AP and payment workflows. More complex environments may need paid professional services, and Tipalti doesn't publish those fees or a typical timeline, so define "complex" in the contract.

What are cheaper alternatives to Tipalti?

No vendor is cheaper in every case, because cost depends on your invoice volume, payment mix and entity count. Compare quotes on the same inputs, and weigh models where virtual card rebates offset platform and transaction costs.

Headshot.JPG

David Luther

Product Marketing Program Manager
David Luther, MBA is a product marketing program manager with years of experience in commercial banking, finance, and technology sectors, with research and writing appearing in financial publications.
AP Automation
Payments Automation

Smarter payments. Stronger growth. Keep business moving.

Corpay powers payments for 800,000+ businesses worldwide. Let’s build what’s next for yours.